Step 3:
Simply select Dynamic IP Address and hit the Apply button.
Please remember to click Reboot System under SYSTEM TOOLS and hit the Reboot button to let the settings take effect.
Note:
Additional configuration might be required before your ISP will allocate an IP address to the access point.
Certain ISPs require authentication through a DHCP Client ID before releasing a public IP address to you. The access point uses the System Name in the System Identity as the DHCP Client ID.
Therefore, if this is the case, refer to your ISP for the correct DHCP Client ID to be set and follow steps 4 - 5 to accomplish the setup.
Step 4:
Steps 4 - 5 are for those who need to set up the System Name in System Identity so that your ISP can authenticate it as a valid DHCP Client ID.
62
