DeWalt WP54AG manual 158

	range of IP addresses.
Source Port	: You can control requests for using a specific application by
	entering its port number here. Users can either set a single port
	number or a range of port numbers.
Destination Port	: This parameter determines the application from the specified
	destination port. Users can either set a single port number or a
	range of port numbers.
Check Options	: This parameter refers to the options in the packet header. The
	available selection options are abbreviated as follows:
	SEC – Security
	LSRR – Loose Source Routing
	Timestamp – Timestamp
	RR – Record Route
	SID – Stream Identifier
	SSRR – Strict Source Routing
	RA – Router Alert
Check TTL	: This parameter would let you screen packets according to their
	Time-To-Live (TTL) value available options are:
	1. Equal
	2. Less than
	3. Greater than
	4. Not equal

158