DeWalt WP54AG manual Current Mode, Site Survey, Wireless Profile, 802.11a only, 802.11b only

This table describes the parameters that can be modified in the WLAN Basic Setup page.

Parameters	Description
The Current Mode	The default operating mode of the access point is the
	Access Point mode. The access point can operate in 6
	modes:
	!	Access Point
	!	Client
	!	Point to Point
	! Point to Multiple Point
	!	Wireless Routing Client
	!	Gateway
	!	Wireless Adapter
	You can toggle the mode by clicking on the Change
	button.
ESSID	Enter a preferred name for the wireless network. Your
	wireless clients must be configured with the same ESSID.
	This case-sensitive entry can consist of a maximum of 32
	characters.
Site Survey	A	list of wireless devices that are detected by your
	access point in the WLAN. Information such as MAC
	address, channel, SSID, algorithm and signal strength can
	be found in the listing.
	This feature is supported by the Access Point Client and
	Wireless Routing Client modes.
Wireless Profile	A selection of network environment types in which to
	operate the access point:
	!	802.11a only
	This mode supports wireless A clients with data rates of up
	to 54Mbps in the frequency range of 5.4GHz.
	!	802.11b only
	This mode supports wireless B clients with data rates of up
	to 11Mbps in the frequency range of 2.4GHz.

40