HOW TO SET UP WPA ENTERPRISE
(Only Access Point mode supports
The guidelines below will help you to set up the access point for using WPA- Enterprise. Please follow the steps below if you have selected the WPA or WPA1- Enterprise, WPA2- Enterprise or WPA- Enterprise
At the WPA1/2-EAP Setup page,
Step 1:
Key in the IP address of the Primary RADIUS Server in your WLAN.
You can optionally add in the IP address of a Secondary RADIUS Server, if any. The RADIUS authentication server MUST be in the same subnet as the access point.
Step 2:
By default, the value for Authentication Port number is 1812. You can either leave this value as it is or key in a different Authentication Port but it MUST match the corresponding port of the RADIUS server.
100
