HOW TO SET UP 802.1X/RADIUS
(Only available in Access Point mode)
The guidelines below will help you to set up the access point for using 802.1x/RADIUS.
At the IEEE 802.1x Setup page,
Step 1:
Key in the IP address of the Primary RADIUS Server in your WLAN. You can optionally add in the IP address of a Secondary RADIUS Server, if any.
The RADIUS authentication server MUST be in the same subnet as the access point.
Step 2:
By default, the value for Authentication Port number is 1812. You can leave this value as it is. This value must be set to be the same as the one in the RADIUS server.
Step 3:
By default, the value for Accounting Port number is 1813. You can leave this value as it is. This value must be set to be the same as the one in the RADIUS server.
98
