REMOTE MANAGEMENT
(only supported by Wireless Routing Client and Gateway)
The advanced network administrator will be delighted to know that remote management is supported on the access point. With this feature enabled, you will be able to access the access point’s
TO SET UP REMOTE MANAGEMENT
Only two simple steps are required to set up remote management for the access point.
Step 1:
Under the CONFIGURATION command menu, click on Remote Management, and you will be brought to the following screen.
Step 2:
To disable Remote Management, just enter 0 for Remote Http Port .
To enable Remote Management, enter a port number that is not being used by other applications in the network. Please take note that it is recommended not to use port number 80 as it is blocked by some ISPs.
In Gateway mode Remote Management is enabled with Port 88. and the Ethernet port becomes a WAN port. To continue using the Ethernet port simply open the web manager using the WAN IP with Port 88.
Example: For WAN IP 100.100.100.1 use http://100.100.100.1:88
NOTE
In view of preventing unauthorized management from a remote location, please remember to replace the default password with a new one.
You are also advised to change this password from time to time to guard against malicious attackers.
134
