EZ Setup during the First Power On

EZ SETUP

_Whan you turn on the TV for the first time, it will automali- eatly memorize the broadcasting channels

Please perform the following instructions before you press

POWER,

(1} Insert the batteries into the remote control

(2)Connect the antenna cable to the LCD TV set

(3)PJug in the AC cord to the wail outlet

Press ENTER to access START EZ SETUP mode Press ,&IV to select "YES", and press ENTER

•Ftyou want to step the EZ SETUPprocess once it has started, press MENU and it will be canceled If you waet to set up again, pleaeesee OH.SETTING

The tuner will automatically search for the broadcasting and cable TV channels (The channel number wiFI automatically increase when it appears)

PLEASEWAfT

AUTOPROGRAMMING

4Once EZ SETUP is completed, the lowest channel number memorized will be displayed

1Press POWER, located or=the upper side of the main unit, to turn on the TV The SELECT LANGUAGE mode will be displayed

Press ,&iV to select "ENGLISH", 'ESPANOL"

:(Spanish) or "FRANCA_S" (French)

2Press ENTER to access CH-SETTfNG mode

Press ,&/'9'to select "ON" or "OFF" When you select

"ON", the LCD TV set will automaticatly memorize the broadcasting channels

• _!you select _OFF*'EZ. SETUP wiltbe cenceted

_ST_REO

_AP

MONO

-Do not let lhe EZ SETUP screen remain unattended for a long time.

• If EZ SETUPdoes not memorize all the channels in your region.

pleasesee CH-SETTtNGtot more information onmanually memorizingthe channels using CH-SETTING

. It may be difticult to preset when1hebroadcasting signals are week. the channelcyctefrequency is incorrector the frequency

jamming is occurring around Ihe area Please see CH-SETTING

tot more _nformatienon manue$1ymemorizingthe channels using CH-SE]-FING