Sharp LC 20SH6U, LC 15SH6U No Signal OFF, No Operation OFF, Directly setting the Picture Flip

NO SIGNAL OFF

Power control setting allows you to save energy

When set to "ENABLE", the power will automatically shut down if no stgnai inputs for 5 minutes

1Press MENU to display the Menu screen

2Press 4,"_ to select "OPTION"

3Press ,A!V to select "NO SIGNAL OFF-, and press

ENTER

4Press /AI'_ to select "ENABLE". and press ENTER

i

5Press MENU to exit

•"DISABLE"is factory preset value

. This function canwork only in TV mode

'Iriotedered with by other broadcast or radiowaves, "NO SIGNAL OFF" may not workpropedy even when the broadcasl is ave_"

NO OPERATION OFF

When set to "ENABLE", the power will automaticaJly shut down if there is no operation for 3 hours

1 Press MENU to display the Menu screen

2:Press "_1_ to select "OPTION"

3Press .,&/V to setect "NO OPERATION OFF", and press ENTER

•5 minutes belore the power shuts down, remaining time is displayed every minute

5 Press MENU to exit

PICTURE FLIP

You can set the orientation of the picture

Setting the PICTURE FLiP on the MENU screen

1 Press MENU to display the Menu screen

2Press _/'_ to select "OPTION"

3Press .&/V to select "PICTURE FLIP", and press

ENTER

4Press A!v to setect the desired mode, and press

ENTER

ROTATE:

UPSIDEDOWN •

5Press MENU to exit

Directly setting the PICTURE FLIP

1Press PICoFLIP to display the PICTURE FLIP screen

2Press PIC FLIP to change the setting

[NORMAL]	[MIRROR]
Normal image	To display	mirror images
orientation	for speciat	uses

UPSIDE	DOWN]		[ROTATE]
To display	upside	down	TOdisplay	rotated images
images for special		uses	for special	uses

. "DISABLE"is factory preset value