NOTE
If no MAC address is entered, the Antenna Alignment tool will make use of the SSID to align the antenna. Please make sure that the correct SSID is entered. If more than one access point (AP) share the same SSID, the Antenna Alignment tool will show the strongest signal AP.
The DIAG LED indicates the signal strength as described below:
Signal Strength | Status of DIAG LED |
(RSSI Value) |
|
Above 20 | Stays turned ON |
Between 19 and 17
Flashes 6 times
Between 17 and 14
Flashes 3 times
Between 13 and 10
Flashes ONCE
Below 10
Turns OFF
NOTE
The signal strength of below RSSI of 10 is not recommended for outdoor long distance connection.
NOTE: To ensure proper functionality of the device, select to ! Stop after performing antenna alignment.
Alternatively, you may also reboot the device.
51
