Acnodes PC 6170 manual Hard Disk Boot Priority, Virus Warning, CPU L1 & L2 Cache

PC 6170 User’s Manual

Hard Disk Boot Priority

This item can select boot device priority.

Virus Warning

This option flashes on the screen. During and after the system boot up, any attempt to write to the boot sector or partition table of the hard disk drive will halt the system with the following message. You can run an anti-virus program to locate the problem. The default setting is “Disabled”.

! WARNING !

Disk boot sector is to be modified

Type “Y” to accept write or “N” to abort write

Award Software, Inc.

Enabled	Activates automatically when the system boots up
	causing a warning message to appear when there is an
	attempt to access the boot sector or hard disk partition
	table.
Disabled	No warning message will appear when attempts to
	access the boot sector or hard disk partition table are
	made.

NOTE: This function is only available with DOS and other operating systems that do not trap INT13.

CPU L1 & L2 Cache

These two options speed up memory access. However, it depends on the CPU/chipset design. The default setting is “Enabled”. CPUs with no built-in internal cache will not provide the “CPU Internal Cache” item on the menu.

Enabled	Enable cache
Disabled	Disable cache

Quick Power On Self Test

This option speeds up Power on Self Test (POST) after you turn on the system power. If set as Enabled, BIOS will shorten or skip some check items during POST. The default setting is “Enabled”.

	Enabled	Enable Quick POST
	Disabled	Normal POST
SBC83810 BIOS Setup		41