‹
CE Marking
‹
FCC Class
A
Safety Approvals

FCC Compliance

This equipment has been tested and complies
with the limits for a
Class
A digit al
device, pursuant
to Part 15 of the FCC
Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. If
not installed and used in
accordance with
proper instructions, this
equipment
might generate or
radiate
radio
frequency
energy
and
cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
that
interference will not occur
in
a particular installation.
If
this
equipment
does cause
harmful interference to
radio
or television
reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measurers:
1.
Reorient or relocate
the receiving antenna.
2.
Increase the
separation between the
equipment and receiver.
3.
Connect the
equipment into an outlet
on a circuit different from
that to
which
the receiver is connected.
4.
Consult
the dealer or
an
experienced radio/TV
technician
for
help.
Shielded
interface
cables
must
be
used
in
order
to
comply
with
emission limits.ou
iii