ADTRAN 810 Plus manual Configuring the Ports for Example, Instructions for Configuring the Ports

Chapter 8. Dedicated Maps Terminal Menu

by-step procedures for creating a sample dedicated map based on the con- nections and ports given in Table 8-1.

Table 8-1. Connections and Ports

Name	ATLAS 810PLUS Port	DS0s	Name	ATLAS 810PLUS Port	DS0s
T1:	Controller T1	9-24	V.35 - A	Quad V.35	N/A
Data A	Slot 0 Port 1	RBS Off		Slot 2/Port 1
T1:	Controller T1	9-24	V.35 - B	Quad V.35	N/A
Data B	Slot 0/Port 2	RBS Off		Slot 2/Port 2
T1:	Quad T1/PRI	9-24	V.35 - C	Quad V.35	N/A
Data C	Slot 1/Port 1	RBS Off		Slot 2/Port 3
T1:	Controller T1	1-8	T1-D	Quad T1/PRI DSX	1-8
Voice A	Slot 0/Port 1	RBS On		Slot 1/Port 2	RBS On
T1:	Controller T1	1-8	T1-D	Quad T1/PRI DSX	9-16
Voice B	Slot 0/Port 2	RBS On		Slot 1/Port 2	RBS On
T1:	Quad T1/PRI	1-8	T1-D	Quad/PRI DSX	17-24
Voice C	Slot 1/Port 1	RBS On		Slot 1/Port 2	RBS On

Configuring the Ports for Example 2

Begin by navigating to Terminal Menu/Modules. From this menu, configure the various ports to match the framing parameters of the T1 line provided by the telco.

	Instructions for Configuring the Ports
Step	Action
1	Select Slt / 0 (system controller T1/PRI port).
2	Set the line framing parameters by selecting Menu /
	Configuration / Frame / ESF.
3	Copy this configuration information for use with additional ports.
	(Navigate to Prt and press C.)
	Navigate to the port index number of the second port (Prt) and
4	press P to paste the configuration information. Press Y to confirm
	paste.
5	Repeat Step 4 for the first port of the T1/PRI card located in Slot 1.
	Navigate to the V.35 port Configuration submenu and repeat
6	Step 2 for the first port, followed by a copy-and-paste to the
	second and third ports (see Figure 8-4).

61200266L1-1 ATLAS 810PLUS User Manual 8-7