
Chapter 9. Dial Plan Terminal Menu
»» DS0s Available | Read security: 5 |
| Indicates which DS0s of the T1 have been defined in this switched endpoint |
| (indicated by “! “), in another switched endpoint (indicated by “s”), or in a |
| dedicated map (indicated by “n”). The following symbols may display in |
| this field: |
digits | This DS0 is available. The digit that displays in this field rep- |
| resents the last digit of the DS0 number. |
* | This port is requesting this DS0 for this connection, but the |
| DS0 is not yet activated. |
! | This DS0 is used by this port in this connection and is activat- |
| ed. |
s | This DS0 is used in the switched Dial Plan. |
S | This DS0 is used in the switched Dial Plan and conflicts with |
| this connection. |
n | This DS0 is already used in this dedicated map. |
NThis DS0 is already used in this dedicated map and conflicts with this connection.
»»Trunk Type (Voice/ Write security: 3; Read security: 5
SW56) | Use if the incoming service on this trunk is Switched 56 digital instead of |
| standard voice. |
»» Signaling Method | Write security: 3; Read security: 5 |
| Defines to ATLAS the type of signaling to be used across this trunk. The sig- |
| naling selected needs to match the signaling being provided by the Net- |
| work (PSTN). The available options include E&M Immediate, E&M Wink, |
| Loop Start, and Ground Start. |
»» Direct Inward Dialing | Write security: 3; Read security: 5 |
| Defines to ATLAS whether DID is being used by the Network. If DID is |
| Enabled, then the following information must be defined: |
DID Digits Transferred
DID Prefix
Write security: 3; Read security: 5
Defines the number of digits sent to ATLAS from the Network if DID is used.
Write security: 3; Read security: 5
Defines to ATLAS the prefix digits which are not received as a part of the DID number. ATLAS uses the combination of prefix and DID number to determine the User endpoint that should receive the incoming call. This option only displays if Direct Inward Dialing (DID) is set to Enabled. If DID is Disabled, then you must define the trunk number.
ATLAS 810PLUS User Manual |