ADTRAN 810 Plus manual »» Strip MSD

Chapter 9. Dial Plan Terminal Menu

DID Prefix	Write security: 3; Read security: 5
	Defines to ATLAS the prefix digits which are not received as a part of the
	DID number. ATLAS uses the combination of prefix and DID number to
	determine the User endpoint that should receive the incoming call.
	If DID is Disabled, then you must define the trunk number.

»Caller ID Number Write security: 3; Read security: 5

Defines the number for ATLAS to use to provide Caller ID to the Network for outgoing calls sent through this endpoint. This option only displays if Direct Inward Dialing is set to 'LVDEOHG. This item is optional.

	The Caller ID number must be specific (i.e., no “wild cards”).
»» Strip MSD	Write Security: 3; Read Security: 5
	Allows a selected quantity of the Most Significant Digits (MSD) of a dialed
	number to be stripped prior to being forwarded out of the port. For exam-
	ple, a User port could be set to accept all calls beginning with 8 (8$), and
	then with Strip MSD set to 1, all digits would be sent toward the network
	except the leading 8.
	The Strip MSD parameter does not affect the Call Accept criteria.
	All of the digits (including the MSDs that are subsequently
	stripped) are used as accept criteria.
»» Source ID	Write security: 3; Read security: 5
	Simplifies the creation of a Dial Plan in applications where the criterion for
	switching calls to a certain endpoint is a function of which endpoint origi-
	nated the call.
	• Default value = 0. The default ID for all endpoints is 0 and all accept # s
	is 0. With default values, all calls are routed based only on dialed num-
	ber.
	• Multiple endpoints can have the same Source ID.
	• When creating the Call Accept list, specify a Source ID(s) as well as a
	dialed number or range of dialed numbers to accept.
	For example, an application requires that all calls that originate from Port 1
	of the Quad T1/PRI module in Slot 1 be switched to Port 4 of that same mod-
	ule. Assign a unique Source ID (e.g. 7) to Port 1 of the module, and then con-
	figure Port 4 to only accept calls from that unique Source ID (7).
	.

61200266L1-1 ATLAS 810PLUS User Manual 9-19