ADTRAN 810 Plus manual Tftp Upload Messages, Message Meaning

Chapter 10. Updating Firmware

Instructions for Updating Firmware Using TFTP (Continued)

Step	Action
	Select Begin Firmware Update to start the update process. Enter
9	Y to confirm the transfer and to set up the module to receive the
	TFTP upload.
10	To update additional modules, begin at step 3 and repeat this
	process.
	During the TFTP upload process, various status messages display in
	Current Update Status to indicate progress. Table 10-1describes
	these messages.

When the update process has successfully completed, Idle displays in Cur- rent Update Status, and Module Update Complete displays in Previous Update Status. Either the module restarts immediately and resumes opera- tion, or it restarts at the specified time and day of the week—depending on your selection.

If an error occurred during the update process, Previous Update Status displays the appropriate error message. In this case, return to step 3 and at-

tempt the update process again. If the same error occurs, contact ADTRAN
Technical Support.
	Table 10-1. TFTP Upload Messages
Message	Meaning
Contacting Server	Indicates communication with the TFTP Network Server is trying to be
	established with the specified server address in the TFTP Server IP
	Address field.
Beginning TFTP Transfer	Indicates communication with the TFTP Network Server has been
	established and the update file is being transferred between ATLAS
	and the TFTP Network Server.
Completed	Indicates the ATLAS product successfully received the update file.
Error: File Not Found	Indicates the TFTP Network Server was unable to locate the specified
	file name or path in the TFTP Server Filename field.
Error: Access Violation	Indicates the TFTP Network Server denied ATLAS access to the given
	update file name and path. Please verify appropriate user rights are
	selected for the specified path.
Error: Illegal Operation	An unknown operation was detected by ATLAS when transferring the
	update file from the TFTP Network Server.
Error: User Aborted	Indicates the user selected Cancel Update to abort reception of the
	update file from the TFTP Network Server.

61200266L1-1 ATLAS 810PLUS User Manual 10-5