
|
| Chapter 8. Dedicated Maps Terminal Menu |
|
| |
»» # | (Index Number) Displays the number of the dedicated map connection. If | |
| you press I in this field, ATLAS 810PLUS adds another dedicated map con- | |
| nection, numbered consecutively. | |
»» FROM Slt | Write security:3; Read security:5 | |
| (From Slot) Specifies the slot to use for the FROM connection. When you | |
| select this option, a list of all of the slots and the modules installed in the | |
| slots displays. Pick the appropriate slot and press Enter. | |
»» Port | Write security:3; Read security:5 | |
| Specifies the port to use for the FROM connection. When you select this | |
| option, a list of ports and module types appears. Pick the appropriate port | |
| and module type, and press Enter. | |
»» From Config | Write security:3; Read security:5 | |
| Specifies the configuration for the FROM connection. The selections dis- | |
| played in this field are based on the type of module selected in the | |
| FROM Slt option. You must input the following | |
| module type. |
|
DS0 Selection | Write security:3; Read security:5 | |
| Defines DS0s for a T1 port. Use this field to define which DS0s will be used | |
| for this connection. You can enter the DS0s in several ways. For example, to | |
| enter DS0s one through five, enter | |
DS0 Available | Read security:5 | |
| Indicates which DS0s of the T1 are assigned. DS0 assignment is based on | |
| the following items: | |
| digits | |
|
| resents the last digit of the DS0 number. |
| * | This port is requesting this DS0 for this connection, but the |
|
| DS0 is not yet activated. |
| ! | This DS0 is used by this port in this connection and is activat- |
|
| ed. |
| s | This DS0 is used in the switched Dial Plan. |
| S | This DS0 is used in the switched Dial Plan and conflicts with |
|
| this connection. |
| n | This DS0 is already used in this dedicated map. |
| N | This DS0 is already used in this dedicated map and conflicts |
|
| with this connection. |
Data Rate | Write security:3; Read security:5 | |
| Defines the data rate per DS0. If FROM Slt is an Nx port, the data rate per | |
| DS0 must be set. You can choose from 64 kbps or 56 kbps. |
ATLAS 810PLUS User Manual |