Chapter 9. Dial Plan Terminal Menu

Quad T1/PRI Module (User Termination/PRI)

 

When you are working in the User Termination section of the Dial Plan

 

menu, Slot is defined as a T1/PRI module, and Sig is set to PRI, the follow-

 

ing configuration options are available:

»» Switch Type

Write security: 3; Read security: 5

 

Defines the type of PRI switch that ATLAS is going to emulate. If connected

 

to another ATLAS, both need to be set to the same type. Options include

 

Lucent 5E, Northern DMS100, National ISDN, and AT&T 4ESS.

»» First DS0

Write Security: 3 Read Security: 5

 

Defines to ATLAS the first active DS0.

»»Number of DS0s Write Security: 3 Read Security: 5

 

Defines the number of DS0s used for calls on this PRI. DS0 24 is assumed to

 

be used by the PRI for the D channel.

» Strip MSD

Write Security: 3 Read Security: 5

 

Allows a selected quantity of the Most Significant Digits (MSD) of a dialed

 

number to be stripped prior to being forwarded out of the port. For exam-

 

ple, a Network port could be set to accept all calls beginning with 9 (9$),

 

and then with Strip MSD set to 1, all digits would be sent toward the Net-

 

work except the leading 9.

»Network Specific Facility Voice

The Strip MSD parameter does not affect the Call Accept criteria. All of the digits (including the MSDs that are subsequently stripped) are used as Accept criteria.

Write Security: 3 Read Security: 5

Defines the specific facility IEs to send to the Network. Use this option if the customer has subscribed to a network specific facility service such as AT&T Megacom service. The facility request sent can be different for voice calls versus data calls. A setting of 1RUPDO indicates no special facilities have been subscribed.

»Network Specific Facility Data

Write Security: 3 Read Security: 5

Defines the specific facility IEs to send to the Network. Use this option if the customer has subscribed to a network specific facility service such as AT&T Megacom service. The facility request sent can be different for voice calls versus data calls. A setting of 1RUPDO indicates no special facilities have been subscribed.

»» Called Digits

Write security: 3; Read security: 5

Transferred

Defines to ATLAS the number of called-number digits to forward. When

 

attached to a PBX, the PBX may be provisioned to expect to receive fewer

 

than all of the called digits of the incoming call. This would normally be set

 

to $OO.

9-16

ATLAS 810PLUS User Manual

61200266L1-1

Page 110
Image 110
ADTRAN 810 Plus manual Quad T1/PRI Module User Termination/PRI, » Strip MSD, » Network Specific Facility Voice