![](/images/new-backgrounds/1204477/204477157x1.webp)
Chapter 7. Modules Terminal Menu
» State | Read security:5 |
|
| Displays whether the module is online of offline. Even though a module is | |
| physically installed, it must be marked Online for it to be considered an | |
| available resource. This parameter allows an installed module to be marked | |
| Offline, which may be useful in system troubleshooting. If you choose | |
| Offline, the module will not be in alarm condition, but will display Offline. | |
|
|
|
|
| Once a module is installed, the state must be set to Online in |
|
| order for the ATLAS to utilize the module for any data bandwidth. |
» Status |
|
|
Read security:5 |
| |
| Displays status information on the ATLAS 810PLUS T1/PRI ports and other | |
| installed modules as follows: | |
| Online | The module is enabled and is responding to the system |
|
| controller’s status polls. This is the normal response of the |
|
| system. |
| No Response | The module is enabled but is not responding to the sys- |
|
| tem controller’s status polls. This response indicates a |
|
| problem in the system or that the module is not installed. |
| Empty | The system controller has not detected the presence of a |
|
| module in the system, nor has a module been manually |
|
| enabled for this option slot. |
| Offline | The module is installed but has been taken Offline by a |
|
| user. The module is still responding to controller polls. |
| Offline/No | The module is installed but has been taken Offline by a |
| Response: | user. The module is not responding to polls. |
| Not Supported | The module is not supported by the current system con- |
|
| figuration. |
» Rev | Read security:5 |
|
| Displays the hardware revision of the ATLAS 810PLUS. |
ATLAS 810PLUS User Manual |