ADTRAN 810 Plus manual Using Telnet, Using T-WATCH PRO, Starting a Telnet Session

Chapter 3. Operation

USING TELNET

To connect to the ATLAS 810PLUS via Telnet, you must define the IP address, set the subnet mask, and, typically, set the default gateway IP address.

You must define the IP address before attempting to connect via Telnet. See Using VT-100 Terminal Emulation on page 3-1for details on defining the IP address.

You will need a default gateway if the LAN contains multiple segments. Contact your LAN administrator for the appropriate address.

Starting a Telnet Session

When you begin the Telnet session, you will be prompted for a password. The default password is password (which is a Level 0 superuser password). You can change this password using the Access Passwords option, which is only accessible through the terminal menus. See Access Passwords on page 6-13for details. The Telnet session will time out and display the Login prompt after a pre-defined time that is set in the Session Timeout option (see Session Timeout on page 6-8for details).

Use the Max Telnet Sessions option to define the number of

Telnet sessions that can be active at one time (see Max Telnet

Sessions on page 6-8for details).

Microsoft Telnet version 1.0 does not implement full VT-100 emulation. However, many commercial Telnet clients for Microsoft Windows exist which fully implement VT-100. In addition, a freeware client, recommended for optimum performance, comes with the ATLAS 810PLUS. See VT-100 Utility on page 12-8for details.

USING T-WATCH PRO

T-Watch PRO is the ADTRAN Microsoft Windows management software program designed to control TSU units from a remote PC. It provides limit-

ed control over the configuration of the ATLAS 810PLUS using a graphic in-

terface. Currently, you can choose ATLAS 810PLUS from a list of products, and T-Watch PRO automatically initiates a Telnet session by which you can connect to and manage the ATLAS 810PLUS Base Unit. At this time,

T-Watch PRO automatically receives SNMP traps from an ATLAS 810PLUS.

61200266L1-1 ATLAS 810PLUS User Manual 3-3