
Chapter 7. Modules Terminal Menu
LCV | Line Code Violations. |
PCV | Path Code Violations. |
LES | Line Errored Seconds. |
»» Performance: 15 Min | Write security:3; Read security:5 |
| In the Performance 15 min. menu, the performance data for the previous 15 |
| minute window is stored. Refer to Performance: Curr on page |
| detailed description. |
»»Performance: 24 Hr. Write security:3; Read security:5
| In the Performance 24 hr. menu, the performance data for the previous 24 |
| hour window is stored. Refer to Performance: Curr on page |
| description. |
»» Configuration | All of these configurable parameters depend on whether the port is connect- |
| ed to a Primary Rate ISDN circuit or a Channelized T1 |
| switched. |
Prt | Read security:5 |
| Identifies the port number. |
Port Name | Write security:3; Read security:5 |
| Accepts any alphanumeric name up to 16 characters long to uniquely iden- |
| tify each port. |
Frame | Write security:2; Read security:5 |
| Matches the frame format of the circuit to which it is connected (available |
| from the network supplier). |
Code | Write security:2; Read security:5 |
| Matches the line code of the circuit to which it is connected (available from |
| the network supplier). |
Tx Yellow | Write security:3; Read security:5 |
| (Auto Tx Yellow Alarm) Enables and disables the transmitting of yellow |
| alarms. |
Tx PRMs | Write security:3; Read security:5 |
| (Transmit PRMs) Enables and disables the sending of PRM data on the facil- |
| ity data link (FDL). The PRM data continues to be collected even if Tx PRM |
| is disabled (possible only with ESF format). |
LBO | Write security:2; Read security:5 |
| (Line Build Out) Depends on whether the circuit is provisioned for DS1 by |
| the telephone company. |
LB Accept | Write security:3; Read security:5 |
| (Loopback Accept) Sets unit to accept or reject the |
| down codes as defined in ANSI T1.403. This is a line loopback. |
ATLAS 810PLUS User Manual |