ADTRAN 810 Plus manual Completed Network Map, Setting User Term Connections

Chapter 9. Dial Plan Terminal Menu

	Figure 9-6. Completed Network Map
	Setting User Term Connections
Step	Action
1	Navigate to User Term.
	Enter connections for BRI D,E, and F in the same manner as BRI
2	A, B, and C: use the copy (C) and paste (P) commands to enter
	the appropriate Out#Accept and Out#Reject numbers.
3	Ensure that the SPID and Phone entries under Ifce Config match
	the SPID and phone numbers of the attached equipment.
4	Enter the connection for T1-A: select RBS under Sig, and enter
	1-900-$ under Out#Reject.
5	Set Trunk Type (under Ifce Config) to Analog.
6	Set Signaling Method to E&M Wink.
7	Set DID (under Ifce Config) to enabled.
8	Set the DID Digits Transferred to 4.

When you complete the User Term Dial Plan, it appears as shown in Figure 9-7.

9-28 ATLAS 810PLUS User Manual 61200266L1-1