Panasonic Customize Your Phone's Ring Tones for KX-TDA50

15.1.2 Ring Tone Pattern Selection

The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that extension through system programming.

[Programming Example of Ring Tone Pattern Table]

Table

No.

1

2

:

Intercom	CO Line Call/Hold			Doorphone Call
	Recall
Call/Hold
Recall	TRG1	TRG2	...	Port 1	Port 2	...
Double	Single			Single
Single	Double			Double
:	:	:	:	:	:		:

Timed

Reminder

:

Call Back LCS

: :

External

Sensor

:

Conditions

•"PT Ring Off Setting" can be enabled or disabled through system programming. If disabled, PT users cannot turn incoming call ringing off for their extension.

•For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can be assigned through personal programming.

PC Programming Manual References

4.14[2-8-1] Ring Tone Patterns—Call from CO— Ring Tone Pattern Plan 1–8

4.15[2-8-2] Ring Tone Patterns—Call from Doorphone— Ring Tone Pattern Plan 1–8

4.16[2-8-3] Ring Tone Patterns—Call from Others— Extension—Ring Tone Pattern Plan 1–8

4.17[2-9] System Options—Option 1— PT Operation—PT Ring Off Setting

6.1[4-1-1] Wired Extension—Extension Settings →Option 1— Ring Pattern Table →Option 6— ICM Tone

6.5[4-1-4] Wired Extension—Flexible Button— Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, ICD Group, SDN)

6.10[4-2-1] Portable Station—ExtensionSettings—Option 1— Ring Pattern Table

6.17[4-3] DSS Console— Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, ICD Group, SDN)

Feature Manual References

21.1 Capacity of System Resources

Operating Manual References

3.1.4Customizing the Buttons—To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button (Digital proprietary telephone only)

280

Feature Manual Document Version 2008-11