13.1.20 Private Network Features—QSIG—CF (Call Forwarding)

PC Programming Manual References

3.14[1-1]Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600only)—Supplementary Service— COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911

3.35[1-3] Option— New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX-TDA200/KX-TDA600 only)

13.1.20 Private Network Features—QSIG—CF (Call Forwarding)

Description

The PBX forwards the call to a destination extension in another PBX in the QSIG network. The destination can be set on your own PBX on an extension basis as the forward destination of CO line calls (6.1.6 FWD (Call Forwarding)).

If the same trunk group is used for the incoming call and the forwarded call, the following situation will be possible.

[Example]

1

 

QSIG

PBX-1

PBX-2

Extension 1000 of PBX-1 dials extension number "2000", and the call is sent to extension "2000" of PBX-2 through QSIG network.

1 Call to 2000

2 Forwarded to 1001

Extn. 1000 Extn. 1001

2

3

Extn. 2000

The call is forwarded to the forward destination of CO line calls of extension 2000, which is extension "1001" of PBX-1.

The call between PBX-1 and PBX-2 is released, and the call is connected directly to the forward destination of extension 2000.

 

(Forward Destination

Dials "2000".

of CO Line Calls: 1001)

 

QSIG

PBX-1

PBX-2

3

Extn. 1000 Extn. 1001

Extn. 2000

Conditions

This feature can be enabled or disabled on each ISDN (QSIG) port of the PBX.

256

Feature Manual

Document Version 2008-11

Page 256
Image 256
Panasonic KX-TDA50 manual Private Network Features-QSIG-CF Call Forwarding, PBX-1 PBX-2