Call Waiting Caller ID Visual Caller ID, Off

3.1.9 CALL WAITING FEATURES

answer the second call by disconnecting the current call or placing it on hold using EFA. For details, consult your telephone company.

Call Waiting Caller ID (Visual Caller ID):

When using the call waiting tone supplied by the telephone company over analog lines, the caller’s telephone number and name can be received. Either the name or the number will flash on the display for five seconds, followed by a 10-second pause, then flash again for five seconds.

Note that the received caller information will not be displayed on telephones or wireless phones connected to SLT ports.

•OHCA and Whisper OHCA are enabled or disabled by the Class of Service (COS) of the calling extension.

•OHCA and Whisper OHCA are not compatible with some telephone types. In such cases, a Call Waiting tone will be sent to the called extension.

OHCA Mode of		Called Extension’s Call Waiting Mode


Calling			ON
Extension’s COS	OFF
Extension’s COS	OFF	Call Waiting Tone	OHCA	Whisper OHCA
		Call Waiting Tone	OHCA	Whisper OHCA

Disable	Call Waiting	Call Waiting tone	Call Waiting tone	Call Waiting tone
	disabled

Enable	Call Waiting	Call Waiting tone	OHCA (or Call	Whisper OHCA (or
	disabled		Waiting tone)	Call Waiting tone)

•The notification receiving methods (call waiting tone, OHCA, and Whisper OHCA) are available when the called extension is having a conversation with another party. If the extension is not having a conversation but is unavailable to receive the notification (dialing a number, for example), the calling extension will be kept waiting until the called extension becomes available. Even while waiting, the calling extension will hear a ringback tone.

•If none of these methods of receiving notification (call waiting tone, OHCA, or Whisper OHCA) are set at the called party, the caller will hear a reorder tone after trying to send a call waiting notification.