1.1.4 Automatic Callback Busy
Section 10 [8] ARS
13.1 
SMDR
PT Programming Manual References
[320]ARS Mode
[321]ARS Leading Number
[322]ARS Routing Plan Table Number[325] ARS Exception Number
[325]ARS Exception Number
[330]ARS Routing Plan Time Table
[347]ARS Routing Plan Table
[350]ARS Carrier Name
[351]ARS Trunk Group for Carrier Access
[352]ARS Removed Number of Digits for Carrier Access
[353]ARS Carrier Access Code
Feature Manual References
21.1Capacity of System Resources
1.1.4Automatic Callback Busy (Camp-on)
Description
If the line is busy when a call is made, a callback ring can inform the caller when the line becomes free.
If the called party was another extension, or if the dialed number is handled by Automatic Route Selection (ARS), the number is automatically redialed after the extension user answers the callback ring.
Conditions
•If the callback ring is not answered within 10 seconds, callback is cancelled.
•If the extension hears a busy tone before dialing the telephone number, only the CO line or trunk group is reserved. After answering the callback ring, the extension should dial the telephone number.
•An extension can set only one Automatic Callback Busy. The last setting is effective.
•Multiple extension users can set this feature for the same CO line at the same time. However, a maximum of four extension users can set this feature to one extension.
Callback ringing will be sent to extensions in the order that the feature was set. In other words, the extension that set the feature first will receive a callback ringing first.
•This feature cannot be used for calls to a Voice Processing System (VPS).
PC Programming Manual References
4.8
Automatic Callback Busy Cancel
4.10
Automatic Callback Busy
Operating Manual References
1.3.4 Automatic Callback Busy
22
Feature Manual | Document Version |
