Panasonic KX-TDA50 manual Delayed Ringing, Walking Extension

13.1.7 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension

Through system programming, it is possible for only incoming calls arriving at PDN buttons to be answered simply by going off-hook, by selecting "PDN" as the incoming line preference (→ 10.1.2 Line Preference —Incoming). This prohibits calls that arrive on non-PDN buttons (e.g., an SDN button) to be answered when going off-hook.

•Walking Extension

For PDN extensions, the Walking Extension feature can only be used when all PDN buttons are idle (→

20.1.2Walking Extension).

•Wireless XDP Parallel Mode

If a PS has PDN or SDN buttons, Wireless XDP Parallel mode cannot be assigned to that PS (→

20.1.4Wireless XDP Parallel Mode).

•OHCA/Whisper OHCA

A PDN extension cannot receive OHCA or Whisper OHCA, unless the call is made using a corresponding SDN button (→ 12.1.3 OHCA (Off-hook Call Announcement), → 20.1.3 Whisper OHCA).

•Alternate Calling—Ring/Voice

It is not possible to temporarily change the called party’s preset call receiving method (ring tone or voice) when calling a PDN extension, unless the call is made using a corresponding SDN button (→

9.1.13Intercom Call).

[Delayed Ringing]

•The same delayed ringing setting is applied to all PDN buttons on an extension. Delayed ringing can be assigned separately for each SDN button.

•Through system programming, it is possible to select whether caller information (such as Caller ID) is shown immediately on a PS when a call is received while delayed ringing is set.

•Caller information (such as Caller ID) is not shown immediately on a PT when a call is received while delayed ringing is set.

•SDN buttons can be set to not ring (only flash) for incoming calls. However, this setting is not available for PDN buttons.

•The forward no answer timer starts when a PDN extension starts ringing.

PC Programming Manual References

4.11[2-7-1] Class of Service—COSSettings—PDN/SDN (KX-TDA100/KX-TDA200/KX-TDA600 only)

4.16[2-8-3] Ring Tone Patterns—Call from Others— Extension—Ring Tone Pattern Plan 1–8

4.17[2-9] System Options—Option 4— System Wireless—SDN Delayed Ringing with LCD (KX-TDA100/KX-TDA200/KX-TDA600 only)

6.1[4-1-1] Wired Extension—ExtensionSettings—Option 9— PDN Delayed Ringing (KX-TDA100/KX-TDA200/KX-TDA600 only)

6.5[4-1-4] Wired Extension—Flexible Button

→ Type

→ Parameter Selection (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)

→ Ext. No. / Floating Ext. No. (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)

→ Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, ICD Group, SDN)

6.10[4-2-1] Portable Station—ExtensionSettings—Option 9— PDN Delayed Ringing (KX-TDA100/KX-TDA200/KX-TDA600 only)

6.13[4-2-3] Portable Station—Flexible Button

→ Type

→ Parameter Selection (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)

→ Ext. No. / Floating Ext. No. (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)

6.17[4-3] DSS Console

→ Type

→ Parameter Selection (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)

Document Version 2008-11 Feature Manual

217