Panasonic KX-TDA50 manual Flexible Buttons, Button Usage

6.1.3 Flexible Buttons

6.1.3 Flexible Buttons

Description

You can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key Modules, and PSs through either system or personal programming. They can then be used to make or receive intercom or CO line calls or be used as feature buttons, as follows:

[Button Usage]

Button

Single-CO (S-CO)

Group-CO (G-CO)

Loop-CO (L-CO)

Direct Station Selection (DSS)

Network Direct Station Selection (NDSS)

One-touch Dialing

Incoming Call Distribution (ICD) Group

Message

FWD/DND (External/Internal/ Both)*1

Group FWD (External/Internal/ Both)

Account Code Entry (Account)

Conference

Terminate

External Feature Access (EFA)

Call Park

Call Park (Automatic Park Zone)

Usage

Used to access a specified CO line for making or receiving calls. (→ 3.1.14 CO Line Access)

Used to access an idle CO line in a specified trunk group for making calls. Incoming calls from CO lines in the assigned trunk group arrive at this button. (→ 3.1.14 CO Line Access)

Used to access an idle CO line for making calls. Incoming calls from any CO line arrive at this button. (→ 3.1.14 CO Line Access)

Used to call an extension with a one-touch operation. (→ 9.1.13 Intercom Call)

Used to access an extension at another PBX within the same network. (→ 13.1.15 Private Network Features—NDSS (Network Direct Station Selection))

Used to call a preprogrammed party or access a feature with a one-touch operation. (→ 12.1.4 One-touch Dialing)

Used to access a specified incoming call distribution (ICD) group for making or receiving calls. (→ 9.1.1 ICD GROUP FEATURES)

Used to leave a Message Waiting indication or call back the party who left the Message Waiting indication. (→ 11.1.3 Message Waiting)

Used to set the FWD or DND feature for the extension. The feature is applied to CO line calls, intercom calls, or both. (→ 6.1.7 FWD/ DND Button, Group FWD Button)

Used to set the FWD feature for a specified ICD group. The feature is applied to CO line calls, intercom calls, or both. (→ 6.1.7 FWD/ DND Button, Group FWD Button)

Used to enter an account code. (→ 1.1.2 Account Code Entry)

Used to establish a multiparty conversation. (→ 3.1.16 Conference)

Used to disconnect the current call and make another call without hanging up. (→ 6.1.2 Flash/Recall/Terminate)

Used to send a flash/recall signal to the telephone company or host PBX to access external features. (→ 5.1.1 EFA (External Feature Access))

Used to park or retrieve a call in a preset PBX parking zone. (→ 3.1.5 Call Park)

Used to park a call in an idle PBX parking zone automatically. (→ 3.1.5 Call Park)

Document Version 2008-11 Feature Manual

107