4.1.6 DIL (Direct In Line)

If the DID number is "123-4567":

1.The PBX looks for the DID number in the table and finds it in location 1.

2.The PBX checks the time mode.

In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI destination, if assigned. If not assigned, the call is routed to the DID destination, extension 105, and "Sales" is displayed. In lunch mode: CLI distribution is disabled. The call is routed to the DID destination, extension 100, and "Sales" is displayed.

Note

Tenant numbers and VM trunk group numbers (not shown here) can also be programmed in the DID Table.

The tenant number programmed here is used only to determine the Time Table used by each DID number; selecting tenant 3 means the DID number will use Time Table 3, for example. The VM trunk group number set here is used to determine the Incoming Call Service and greeting message used by the Voice Processing System (VPS) during the current time mode. (19.1.4 Voice Mail DPT (Digital) Integration)

Conditions

To use this feature, DID must be assigned as the distribution method for the desired CO line port.

PC Programming Manual References

4.4[2-3] Timers & Counters—Miscellaneous— Incoming Call Inter-digitTimer—DID

12.2[10-2] DIL Table & Port Settings—DID/TIE

Distribution Method

DID/TIE—Remove Digit

DID/TIE—Additional Dial

12.3 [10-3] DID Table

PT Programming Manual References

[451]DID Number

[452]DID Name

[453]DID Destination

Feature Manual References

3.1.12CLI (Calling Line Identification) Distribution

9.1.10INCOMING CALL FEATURES

17.1.3Tenant Service

17.1.5Time Service

21.1 Capacity of System Resources

21.2 Exclusive Features Table

4.1.6DIL (Direct In Line)

Description

Directs an incoming public CO line call to a preprogrammed destination based on the CO line carrying the call. Each CO line has a destination for each time mode.

Document Version 2008-11

Feature Manual

73

Page 73
Image 73
Panasonic KX-TDA50 manual DIL Direct In Line