Conditions
[General]
•Hardware Requirement
The KX-TDA6920, KX-TDA0920 or KX-TDA5920 SD Memory Card for Software Upgrade to Enhanced
Version
•For this feature to be activated, the following conditions must be met:
–A virtual PS is assigned as a member of the ICD Group. (® 19.1.2 Virtual PS)
–The forwarding type of the virtual PS is set to All Calls. (® 6.1.6 FWD (Call Forwarding))
–The forwarding destination is an outside party, including an extension at another PBX in the network.
–FWD to CO line is allowed through COS programming for the virtual PSs.
–The distribution method for the ICD Group is set to Ring. (® 9.1.2 ICD Group Features—Group Call
Distribution)
•Up to 4 virtual PSs can be assigned to a single ICD Group. If more than 4 are assigned, the 4 virtual PSs
with the lowest member numbers are available.
•ELCOT/LCOT CO lines and channels of a T1 CO line set to LCOT do not support this feature.
•Calls to an ICD Group will ring at a virtual PS even if all of the other extensions assigned to the group are
busy.
•If all members of an ICD Group are virtual PSs, and CO lines are available but the called parties are all
busy, neither the queuing or overflow features will operate. Therefore, it is recommended that at least one
PT or SLT is also assigned to an ICD Group.
•To log in to or out of a group, a virtual PS user can access the PBX through DISA, enter the Walking COS
feature number (if required), and access log-in/log-out settings.
•Delayed ringing can be assigned for virtual PSs in the same way as for other extensions.
•The wrap-up time feature is not available for virtual PSs.
[KX-TDA100/KX-TDA200/KX-TDA600]
•When forwarding calls to a public CO line, system programming selects whether the CLIP number of the
calling party or of the virtual PS is sent to the forward destination.
When calling using a private network, the CLIP number of the calling party will always be sent.
PC Programming Manual References
3.34 [1-2] Portable Station—PS Registration and De-registration
4.11 [2-7-1] Class of Service—COS Settings—CO & SMDR— Call Forward to CO
4.17 [2-9] System Options—Option 4— Send CLIP of CO Caller to ISDN—when ICD Group with Cellular
Phone (KX-TDA100/KX-TDA200/KX-TDA600 only)
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Main
→Floating Extension Number
→ Distribution Method
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Member List
→Extension Number
→ Delayed Ring
6.12 [4-2-2] Portable Station—FWD/DND
→Call from CO—FWD Mode
→ Call from CO—FWD Destination
→ Call from Extension—FWD Mode
→ Call from Extension—FWD Destination
PT Programming Manual References
[620] Incoming Call Distribution Group Member
150 Feature Manual Document Version 2008-11
9.1.4 ICD Group Features—Outside Destinations