10.1.4 Local Alarm Information

Method

Prime Line

Description

When an extension user goes off-hook, the preset line is selected automatically. A prime line can be selected from the Line Access buttons: S-CO, G-CO, L-CO, ICD Group.

Conditions

Line Preference Override

A user can override the preset Line Preference temporarily by pressing the desired Line Access button or a Memory Dialing button, such as One-touch Dialing, before going off-hook.

To select Idle Line Preference, the trunk groups available to the extension should be programmed on a COS basis. Also trunk groups available for Idle Line Access should be assigned.

PC Programming Manual References

4.12[2-7-2] Class of Service—External Call Block

5.2[3-1-2] Trunk Group—Local Access Priority

6.1[4-1-1] Wired Extension—ExtensionSettings—Option 4— Outgoing Preferred Line

6.10[4-2-1] Portable Station—ExtensionSettings—Option 4— Outgoing Preferred Line

PT Programming Manual References

[103]Idle Line Access (Local Access)

[500]Trunk Group Number

Operating Manual References

3.1.2 Personal Programming

10.1.4 Local Alarm Information

Description

When the PBX detects an error, the System Alarm button on the proprietary telephone (PT) of an extension which is allowed to use this feature through system programming (a maximum of two extensions per PBX), lights red. Pressing the button will show the error number on the display. If multiple errors occur, the error number will be displayed in order of highest priority to lowest. The System Alarm button light turns off automatically after all error numbers have been displayed.

For details about the errors and their solutions, refer to the Installation Manual.

180

Feature Manual

Document Version 2008-11

Page 180
Image 180
Panasonic KX-TDA50 manual Local Alarm Information, Method Prime Line Description, Line Preference Override