3.1.3 Call Log, Incoming
Mode 4
Hold
Flashing the hookswitch
+
Hold Feature No.
+
Going
Hold
(to be Retrieved from Another Extension)*1
Flashing the hookswitch
+
Hold Feature No.
+
Hold Feature No.
+
Going
Transfer to CO
Line
Flashing the
hookswitch
+
Hold Feature No.
+
CO Line Access No.
Transfer to
Extension
Flashing the
hookswitch
+
Hold Feature No.
+
Extension No.
*1 | These operations must be performed when the held call is intended to be retrieved from another extension using the holding |
| |
| extension number. |
If one of the following occurs frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode 4":
a.When an SLT user answers a call, a reorder tone is heard or no one is heard on the other end.
b.When an SLT user goes
If a call is not terminated after going
choose "Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless the Hold feature number is entered after flashing the hookswitch in Mode 2, Mode 3, and Mode 4.
•Hold Alarm tone pattern has a default. (→ 21.3 Tones/Ring Tones)
PC Programming Manual References
4.4
→
→
4.8
→ Call Hold / Call Hold Retrieve
→ Call Hold Retrieve : Specified with a Holding Extension Number
→ Hold Retrieve : Specified with a Held CO Line Number
4.17
→Option 1— PT
→Option 5—
PT Programming Manual References
[200] Hold Recall Time
Operating Manual References
1.3.6Call Hold
3.1.3Call Log, Incoming
Description
When a call containing Caller ID information is received by an extension, the information is shown on the telephone display, notifying the extension user of the caller’s identity. This information is also automatically logged in the Incoming Call Log of the extension, and can be viewed later or used to call that caller back.
38
Feature Manual | Document Version |