Panasonic KX-TDA50 manual To use the voice message feature, Time Service Switching Mode

17.1.5 Time Service

The Alarm Ringing time, the number of alarm repeat times, and Interval time are programmable through system programming.

•To use the voice message feature:

An extension assigned as a manager can record messages (→ 12.1.2 OGM (Outgoing Message)). A different message can be assigned for each time mode (→ 17.1.5 Time Service).

PC Programming Manual References

4.4[2-3] Timers & Counters—DISA / Door / Reminder / U. Conf

→ Timed Reminder—Repeat Counter

→ Timed Reminder—Interval Time

→ Timed Reminder—Alarm Ringing Duration

4.8[2-6-1] Numbering Plan—Main—Features

→ Remote Timed Reminder (Remote Wakeup Call)

→ Timed Reminder Set / Cancel

4.16[2-8-3] Ring Tone Patterns—Call from Others— Timed Reminder—Ring Tone Pattern Plan 1–8

4.17[2-9] System Options—Option 1— PT LCD—Time Display

7.3[5-3-1] Voice Message—DISA System— Timed Reminder Message—Day, Lunch, Break, Night

8.2[6-2] Hotel— SMDR for External Hotel Application 1—Timed Reminder (Wake-up Call)

Feature Manual References

15.1.3 Room Status Control

Operating Manual References

1.3.64Timed Reminder

1.3.71Wake-up Call

17.1.5Time Service

Description

Time modes are used by many PBX features to determine how they will function during different times of day. For example, incoming calls can be directed to sales staff during the day and to a Voice Processing System (VPS) at night, extension users can be prohibited from making long distance calls during lunch time, etc.

There are four time modes—day, lunch, break, and night. The start and end times of each time mode are programmed for each day of the week in a Time Table. Each Time Table has a number which corresponds to the tenant it serves, i.e., Tenant 1 uses Time Table 1, etc.

1.Time Service Switching Mode

The current time mode can switch automatically to another time mode at the preprogrammed time assigned in the Time Table. It is possible, however, to switch time modes manually.

Whether time modes are normally switched manually or automatically is determined through system programming. Each tenant is assigned a switching mode.

Document Version 2008-11 Feature Manual

309