Operating Manual References
1.3.18 DISA (Direct Inward System Access)
1.3.72 Walking COS
4.1.8 Display Information
Description
A display proprietary telephone (PT) can relay the following information to the user while making or receiving
calls:
Display Item Display Example Condition
The extension number and name of the calling
or called extension, or Incoming Call
Distribution (ICD) Group
123: Tom Smith –
Status of the called extension 123: Busy –
The number and name of the optional device D02: 1st Door –
The telephone number dialed 1234567890 –
The received call information
a. Caller’s name
b. Caller’s number
c. CO line number/name
d. Original Destination, if the call is forwarded
e. DID name
ABC Company
12345678
Line 001: Sales
®102:Mike
Panasonic
The first line message can
be either (a), (c), or (e) at
each extension through
system programming.
These can be displayed in
turn by pressing the
TRANSFER button or DISP
Soft button during a call.
Duration of the current CO line call Line 001 11:02’28 –
Conditions
•Multilingual Display
Each extension can select its display language through personal programming (Display Language
Selection).
•Display Contrast
The display contrast can be adjusted through personal programming (Display Contrast Selection). This is
available only for DPTs and IP-PTs.
•Display Backlight
Some extensions can select whether to turn the display backlight on or off through personal programming
(Display Backlight Selection). For details, refer to the manual for your telephone.
•Characters (name) or digits (number) exceeding the display’s limitations are not displayed. Although in this
case information may not be displayed properly, the received information is not altered.
PC Programming Manual References
4.17 [2-9] System Options—Option 5— PT Feature Access—No. 1–8
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 4— Display Language
→Option 5— Incoming Call Display
Document Version 2008-11 Feature Manual 85
4.1.8 Display Information