ADTRAN 810 Plus manual » Licenses, Instructions for Changing Passwords Step Action

Chapter 6. Terminal Menu and System Control

Instructions for Changing Passwords

Step Action

1Select the Password field—a new Password field displays.

2Type the new password in the Enter field.

3Type the new password again in the Confirm field.

The password can contain up to 12 alphanumeric characters. You can also use spaces and special characters in the password.

»» Access Rights	Write security: 0; Read security: 5
	Defines the password level for the corresponding label. You can select from
	six different password levels (see also Table 6-1 on page 6-2).
»» Active	Write security: 0; Read security: 5
	Displays the number of users for each label that are currently logged into
	the system.
» Licenses	Menus to enable optional ATLAS feature upgrades (Frame Relay, etc.).
»» Feature	Names the ATLAS feature upgrade.
»» License Key	Displays the license key of the feature upgrade.
»» Serial Number	Displays the serial number of the feature upgrade.
»» Lic cnt	Displays the number of instances of the feature that the license provides.
	This field may not be applicable for a given feature—if it is not, this field is
	blank.
»» Status	Reflects the status, Permanent or Temporary, of the feature upgrade license
	key.

6-14 ATLAS 810PLUS User Manual 61200266L1-1