
Chapter 9. Dial Plan Terminal Menu
»» Search | Write Security: 3; Read Security: 5 |
| Defines to ATLAS the order in which to search for an accept number. |
Primary Search The Search parameter instructs ATLAS which order to search for an accept number match. Normally all searches are set to primary. The secondary search selection would be used to force ATLAS to only accept a call at this endpoint if all primary endpoints were unavailable.
For example, all long distance calls should go out a PRI directly to an IXC (MCI, ATT, etc.), and local calls should go out a T1 to the LEC. It may be de- sirable to place long distance calls on the local exchange if all of the IXC trunks are unavailable (busy or in alarm). In this case, the primary accept number for the local exchange would be N$, and the secondary accept would be 1$.
Secondary Search The same accept rules apply for all secondary number searches as for prima- ry searches.
»»Data 64K, Data 56K, Write security: 3; Read security: 5
Audio, Speech | Reflects the attached user equipment (typically a TA) bearer capability. If |
| the attached TA can only handle digital calls, then a voice call sent to this |
| endpoint would be rejected. |
»» Treat Call As | Allows the incoming call t be treated as the selected call type, regardless of |
| the actual incoming call type. The default selection As Received effectively |
| disables the feature by using the actual call type. |
» Out#Rej | Write security: 3; Read security: 5 |
| Defines the parameters for outgoing calls that ATLAS 810PLUS will not send |
| to the Network. |
»» Reject Number | Designates which numbers this particular endpoint will not pass on toward |
| the Network (PSTN). Use when the outgoing call filter is different for differ- |
| ent users. The wild cards are identical to the Outgoing Call Accept wild |
| cards. If desired, each User termination port can be set to reject different |
| numbers. |
|
|
|
|
| termination. If permitted in the Network termination endpoint, this |
| user could not dial long distance numbers while other users could. |
|
|
ATLAS 810PLUS User Manual |