ADTRAN 810 Plus manual Instructions for Updating Firmware Using Xmodem Step Action, Successfully

Chapter 10. Updating Firmware

Instructions for Updating Firmware Using XMODEM (Continued)

Step	Action
	From the terminal emulation software, begin the XMODEM upload
	by using the appropriate command sequence. (If necessary, refer
	to your terminal emulation software documentation for help. Also,
	when specifying the filename, ensure that the file transferred is the
	one provided by ADTRAN; otherwise, the update will not complete
	successfully.)
8
	Because XMODEM data is being transferred in-band through the
	menu interface, the VT-100 menus of ATLAS will be inoperable
	from the Chain In port. You can cancel the update at any time
	within the terminal emulation software. (Please consult the
	documentation provided by the terminal emulation software to
	determine how to do this.)
9	To update additional modules, begin at step 3 and repeat this
	process.

When the update process has successfully completed, Idle displays in the Current Update Status field and Module Update Complete displays in the Previous Update Status field. Either the module restarts immediately and resumes operation, or it restarts at the specified time and day of the week— depending on your selection.

If an error occurred during the update process, Previous Update Status displays an appropriate error message.

Figure 10-1. Update Firmware Menu Interface

61200266L1-1 ATLAS 810PLUS User Manual 10-3