ADTRAN 810 Plus Setting PRI B Global Param Step Action, Setting PRI C Global Param Step Action

			Chapter 9. Dial Plan Terminal Menu
		Setting PRI A Global Param (Continued)
	Step		Action
7		Back out of the connection to the index number column by
		pressing ESC on the keyboard.
8		Insert three more connections into the list for the BRI lines by
		typing the letter I three times.
		Enter Out#Accept and Out#Reject numbers for Slot 1/ Port 1.
		The Out#Accept numbers have two entries:
9
		Entry 1) 888-01[0,1]X	Allows all numbers 888-0100 to 888-0120
		Entry 2) 888-0120

Set the BRI switch type (from Ifce Config) used by the network to

10National ISDN. From SPID, enter the SPID numbers and phone numbers which match the network provisioning for this BRI line.

11Press ESC to return to the index column, #.

Setting PRI B Global Param

Step Action

1While on the entry for BRI A, type C to copy the entire BRI A entry.

2	Move to the next connection list entry and type P to paste all of the
	BRI data.

3Move to each field and modify as appropriate for BRI B.

Setting PRI C Global Param

Step Action

1While on the entry for BRI B, type C to copy the entire BRI B entry.

2	Move to the next connection list entry and type P to paste all of the
	BRI data.

3Move to each field and modify as appropriate for BRI C.

After completing the network entries, the Network connection map appears as shown in Figure 9-6.

61200266L1-1 ATLAS 810PLUS User Manual 9-27