
Chapter 9. Dial Plan Terminal Menu
»»Outgoing Number Write Security: 3 Read Security: 5
Conversion | Defines the rules for converting |
| and plan. |
As dialed | Send digits provided as unknown number type. |
ISDN - National pref | Convert to ISDN type, using the |
ISDN - Subscriber | Convert to ISDN type, using the |
pref |
|
ISDN - National | Send digits provided as National Number Type, DMS Reserved Numbering |
DMS Reserved pref | Plan. |
|
|
| When a 4ESS is configured, many installations will require the |
| national form where possible; this may also be the preferred form |
| in |
|
|
»» Strip MSD | Write Security: 3 Read Security: 5 |
| Strips a selected quantity of the Most Significant Digits (MSD) of a dialed |
| number prior to being forwarded out of the port. For example, a Network |
| port set to accept all calls beginning with 9 (9$) and Strip MSD set to 1, |
| sends all digits toward the Network except the leading 9. |
|
|
| Strip MSD does not affect the Call Accept criteria. All of the |
| digits (including the MSDs that are subsequently stripped) are used |
| as Accept criteria. |
|
|
»»Netwrk Spec. Fac.- Write Security: 3 Read Security: 5
Voice | (Network Specific Facility - Voice) Defines specific facility IEs to send to the |
| Network. Use this option if the customer has subscribed to a network spe- |
| cific facility service such as AT&T Megacom service. The facility request |
| sent can be different for voice calls versus data calls. A setting of 1RUPDO |
| indicates no special facilities have been subscribed. |
»»Netwrk
Data | (Network Specific Facility - Data) Defines specific facility IEs to send to the |
| Network. Use this option if the customer has subscribed to a network spe- |
| cific facility service such as AT&T Megacom service. The facility request |
| sent can be different for voice calls versus data calls. A setting of 1RUPDO |
| indicates no special facilities have been subscribed. |
»» Called Digits | Write security: 2; Read security: 5 |
Transferred | Defines the number of digits to expect (choose from 1RQHñý7KUHHñý)RXUñ and |
| $OO). The default is All and would almost always be correct. If less than All |
| digits are sent, then the prefix is defined below. Use this option for PRI |
| switches that only send a portion of the called number (like DID). |
ATLAS 810PLUS User Manual |