Chapter 4 | Installation |
(When you create your first user account, it will appear as though you are editing the admin account; however, you are only replacing the admin account with the new account. The admin account is not overwritten or deleted.)
Once you have created a user account, you can edit it (change the user name and/or password) or delete it. If the system contains only one user account and you delete that account, the original admin account will reappear in its place. This is because the system must always have at least one account.
To add a new user, use the arrow keys to select Edit, press Enter, then enter the new account’s user name and password in the Username and Password columns, and
To delete an existing user account, use the arrow keys to select Edit, press Enter, then delete the user name in the Username column.
To save your changes, press Esc, use the arrow keys to select Save, then press Enter.
Security Settings
The IP Configuration screen displays one option: Disable Active Management Access Profile.
Security Settings
Selecting this option will prompt you to confirm that you want to disable the active management access profile.
NOTE: This setting has no effect when Management Access Rules are not defined.
IP Configuration
The IP Configuration screen displays three menu choices: IP Address Settings, HTTP Configuration, and Network Configuration.
IP Configuration
IP Address Settings
The IP Address Settings screen allows you to set the IP information for the Switch.
IP Address Configuration
IP Address This sets the Switch’s IP Address. The default setting is 192.168.1.254. If you change the IP address, verify that the address you enter is correct and does not conflict with another device on the network.
Subnet Mask This combined with the IP Address defines the Switch’s network address.
Default Gateway This defines the IP Address for the default gateway of the network.
Management VLAN This is the ID number of the Management VLAN.
DHCP Client The status of the DHCP client is displayed. If you want the Switch to be a DHCP client, then select ENABLE. If you want to assign an static IP address to the Switch, then enter the IP settings and select DISABLE.
HTTP
The HTTP screen allows you to set the Hyper Text Transfer Protocol server (web server) information for the Switch.
11 |
