Cisco Systems OL-6918-01 manual Configuring Home Addresses With NAI

Chapter 4 Using Service Manager

Activating Services on HA Devices

The Home Address Assignment–With NAI dialog box displays a list of all the hosts, which are configured with an NAI, in the selected group. It contains:

Field	Description
NAI String	Specifies the network access identifier. The NAI can be a unique identifier
	(username@realm) or a group identifier (realm).
Home Link	Specifies either:
	• Interface to which the mobile node belongs.
	• Virtual network in which the mobile node resides.

Click any column heading to sort the list.

Step 3 From the Home Address Assignment–With NAI dialog box, you can:

•Click Execute without selecting a host to create a host configured with an NAI in the selected group.

•Choose a host and:

–Click Execute to modify its configuration.

–Click List to see its current configuration.

–Click Delete to delete it. You can also delete one or more hosts at the same time.

When you select one or more hosts, the Execute and List buttons will be disabled.

For more information, see Configuring Home Addresses With NAI, page 4-20.

Configuring Home Addresses With NAI

You can assign home addresses to a mobile node in the selected group by using NAI with a Home Address Assignment wizard. The Home Agent does not permit simultaneous registrations for different NAIs with the same IP address, regardless of whether it is statically or dynamically assigned.

You can also specify the interface on the network or a virtual network to which the mobile node belongs, its security associations, or download them from an AAA server. All hosts must have security associations for registration authentication. They can have more than one security association. The Home Agent can control where the mobile nodes roam by specifying the care-of-address (CoA) access list.

To launch the Home Address Assignment With NAI Configurations wizard:

Step 1 Choose a device group (Choose Service Manager > Select Group). See Selecting an HA Device Group, page 4-3.

Step 2 Choose HA Service Manager > Service Activation > Home Address Assignment > With NAI.

The Home Address Assignment–With NAI dialog box displays a list of all the hosts, which are configured with an NAI, in the selected group.

Step 3 Perform one of these actions:

•To create a host configured with an NAI, click Execute without selecting one.

•Choose the host you that want to modify, then click Execute.

User Guide for Cisco Home Agent Service Manager

4-20 OL-6918-01