Cisco Systems OL-6918-01 Hot-Lining, Choose HA Service Manager Service Activation Hot Lining

Chapter 4 Using Service Manager

Activating Services on HA Devices

Hot-Lining

You use the Hot-lining feature to monitor upstream user traffic by using two different scenarios: active and new session. When Hot-lining is active for a particular user, the upstream IP packets from the mobile are re-directed to the redirect server that is configured for this particular realm. This is achieved by changing the IP packet destination address to the redirect server address.

To display a list of all realms that are configured with hot-lining in the HA Service Manager:

Step 1 Choose a device group (Choose Service Manager > Select Group). See Selecting an HA Device Group, page 4-3.

Step 2 Choose HA Service Manager > Service Activation > Hot Lining.

The Hot Lining dialog box displays a list of realms that are configured with hot–lining, in the selected device group. It contains:

Field	Description
Realm Name	Specifies the realm name. It is a unique identifier with the syntax @realm.
Redirect Server	Specifies the IP address of the redirect server.

Click any column heading to sort the list.

Step 3 From the Hot-lining dialog box, you can:

•Click Execute without selecting a realm to configure hot-lining.

•Choose a realm and:

–Click Execute to modify its hot-lining configuration.

–Click List to view its current configuration.

–Click Delete to delete it. You can also delete one or more hot-lining configurations at the same time.

When you choose one or more hot-lining configurations, the Execute and List buttons will be disabled.

For more information, see Configuring VRF Support on HA Devices, page 4-31.

User Guide for Cisco Home Agent Service Manager

4-34 OL-6918-01