The control panel asks whether to accept the current head heights.
12.Press " to save the calibration.
The control panel prompts you to remove the head height gauge and ensure that the platen is clear of all obstructions.
13.Press ! (Proceed) to return the carriage to its home position.
14.The control panel prompts you to press ! (Proceed) to complete the calibration.
15.Press ! (Proceed).
The control panel asks whether you want to perform a media thickness calibration next (required).
•To perform a media thickness sensor calibration, press ". Then go to the next section, “Calibrating the Media Thickness Sensor” on page
Service Calibrations |
