sure and adjust the media advance as needed until the pattern is exactly 34 inches (900 mm) long.

10-inch (250 mm) calibration — prints a 10-inch (or 250

mm)test pattern so you can verify its length with an accurate metal ruler. This is not as precise as the 34-inch (900 mm) calibration, but it uses less media. Measure and adjust the media advance as needed until the pattern is exactly 10 inches (250 mm) long.

Fig. 4-2. Measure between the calibration marks

Input MFN — enter the Media Feed Number that was displayed after a previous media feed calibration, to return to that setting without performing the calibration again.

4-10

Manual Calibrations