1.Remove the profiler.
2.Grasp the metal connector where the ink tube enters the printer, and push it up to release the ink supply tube.
3.Lift the box out of its holder and turn the box upside down so the ink tube is pointing up.
4.Remove and dispose of the ink box (refer to the MSDS for proper disposal procedures).
1.Open the new ink box and locate the supply connector.
2.Locate and remove the profiler, and set aside until step 5.
3.Invert and install the ink box into position in the holder, so the ink supply tube is at the bottom of the box.
4.Insert the ink tube connector into the metal connector on the printer.
The position for each ink color is shown on a label below each ink box and next to the profiler docking station.
5.Install the profiler in the corresponding docking station slot.
Loading Ink |