IBM GC34-5557-00 manual Installation and Maintenance Parameters, Aaction, Installing on OS/2 Warp

Installing on OS/2 Warp

command, you must type it as one continuous line. In the example above, for clarity, the command is spread over several lines.

In this example, the MQSeries client is installed from the redirected drive J: on the server, according to the options supplied in the response file AMQISMC2.RSP. Note that drive J: must be a writeable drive that you must create, and the .RSP file must be put on that drive. The installation log files will also be created on the J: drive. The response file specifies the drive and directory in which to install the client. Errors are logged in MQM.OUT and the history log is contained in MQM.HIS. The /X parameter specifies that the installation is non-interactive.

The example also shows that you must have the INSTALL.EXE available to your system. This file is supplied on the client CD-ROM, but is not installed onto your system. You must make a copy of this file available when you perform maintenance updates on your system.

Installation and Maintenance Parameters

The installation and maintenance parameters are as follows:

INSTALL /A:action /G:include path /L1:error log /L2:history log /R:response file /S:source location

/T:install target directory

/TU:update CONFIG.SYS directory /X

Note: You can enter the parameters in any order. Equals signs (=) can be used instead of colons (:) in the parameters. Values can be upper or lower case.

/A:action

Specifies the action to be performed by the installation program. If you

specify this parameter, the main window of the installation program is not displayed. Valid values for action are:

DDelete an installed MQSeries for OS/2 Warp system

I Install a new MQSeries for OS/2 Warp system

R Restore a backed up MQSeries for OS/2 Warp system

U Update an installed MQSeries for OS/2 Warp system

Note: The installation program is not supplied with a corrective service medium. Therefore, if you are updating, restoring, or deleting an MQSeries for OS/2 Warp system, you must have access to the installation program used to install it.

Chapter 7. Installing MQSeries Clients 71