IBM GC34-5557-00 Installing, Migrating to, and Deleting MQSeries for AS/400, Before Installation

Chapter 4. Installing, Migrating to, and Deleting MQSeries for AS/400

This chapter describes installation of and migration to MQSeries for AS/400, V5.1. It covers the following topics:

vªBefore Installationº

vªInstallation Procedureº on page 21

vªVerifying the Installationº on page 22

vªQuiescing MQSeriesº on page 23

vªMigrating to MQSeries for AS/400, V5.1º on page 24

vªVerifying the Migrationº on page 29

vªDeleting MQSeries for AS/400, V5.1º on page 31

In addition to reading the information in this chapter, you should refer to the readme file on the publications CD-ROM, and also to the latest information available on the MQSeries Web site at:

http://www.ibm.com/software/ts/mqseries/

Before Installation

If you are migrating from an earlier release of MQSeries for AS/400, refer to ªMigrating to MQSeries for AS/400, V5.1º on page 24.

You must have the OS/400 V4R4 operating system installed on your machine in order to run MQSeries for AS/400, V5.1. If you have OS/400 V4R2 or V4R3 operating system installed, you can use only MQSeries for AS/400 V4R2M1.

Setting System Values

Before installing MQSeries for AS/400, you should use the DSPSYSVAL command to check that the following system values are set to the requirements of your enterprise:

vQCCSID

vQUTCOFFSET

vQSYSLIBL

vQALWOBJRST

You can change these values, if necessary, using the CHGSYSVAL command.

© Copyright IBM Corp. 2000 19