IBM GC34-5557-00 manual Components for HP-UX, OS/2 Warp Client Hardware and Software Required

Hardware and Software, HP-UX

Compilers for MQSeries Applications on HP-UX Clients

The following compilers are supported:

vMicro Focus COBOL for UNIX, Version 4.0

vHP-UX ANSI C compiler

vC Softbench, Version 5.0

vHP CFRONT C++, Version 3.1

vIBM C and C++ compilers, Version 3.6

vHP ANSI C++

Components for HP-UX

These are identical to those for AIX. See ªComponents for AIXº on page 46.

OS/2 Warp Client: Hardware and Software Required

This section outlines the hardware and software requirements for an MQSeries client for OS/2 Warp.

Hardware

An MQSeries client can run on OS/2 Warp, on a personal computer. There must be enough random access memory (RAM) and disk storage for the programming prerequisites (below), the MQSeries client, the access methods, and the application programs.

The system unit must have a CD-ROM device.

Software

The following are prerequisites for MQSeries applications running an OS/2 Warp client.

This is the minimum supported software level. Later levels, if any, will be supported unless otherwise stated.

vOS/2 Warp, Version 4.0 (84H1426) (5622-851)

vOS/2 Warp Server, Version 4.0 (25H8002)

vOS/2 Warp Server Advanced SMP feature, Version 4.0

vOS/2 Workspace-on-Demand

Connectivity

vIBM eNetwork Communications Server for OS/2 Warp, Version 5.0

vNovell Netware Client for OS/2 Warp, Version 1.20 (for direct IPX/SPX support)

vIntraNetWare Client for OS/2 Warp, Version 2.12

vTCP/IP for OS/2 Warp, Version 2.0 base kit plus NetBIOS kit, Version 3.5 (base kit is essential)

vNetWare for OS/2 Warp, Version 4.11

50MQSeries for AS/400, V5.1 Quick Beginnings