Hardware and software, Digital UNIX
Compilers for MQSeries applications on Digital UNIX clients
The following compiler is supported:
vDEC C, Version 5.2 for Digital UNIX
DOS Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries client for DOS.
Hardware
An MQSeries client can run on DOS, on a personal computer. There must be enough random access memory (RAM) and disk storage for the programming prerequisites (below), the MQSeries client, the access methods, and the application programs.
Software
The following are prerequisites for MQSeries applications running on a DOS client.
Minimum supported software levels are shown. Later levels, if any, will be supported unless otherwise stated.
vDOS, Version 5.0 or later
Connectivity
vTCP/IP (in the operating system)
vSPX
Optional software
vNovell Netware Client for DOS/Win, Version 1.20 and Version 2.5
vNovell LAN Workplace, Version 5.1
vFTP PC/TCP for DOS, Version 5.0
The DOS access kit allows clients access to TCP/IP via programs that run in a DOS window under
The Novell Netware Client for OS/2 Warp allows clients access to SPX via programs that run in a DOS window under
Compilers for MQSeries Applications on DOS Clients
The following compiler is supported:
vMicrosoft® Visual C++, Version 1.5
