IBM GC34-5557-00 manual Installing MQSeries Clients, Installing on AIX

Chapter 7. Installing MQSeries Clients

This chapter describes the following:

vªInstalling MQSeries Clients on the Same Machine as the Serverº

vªInstalling on AIXº

vªInstalling on DOSº on page 64

vªInstalling on HP-UXº on page 65

vªInstalling on OS/2 Warpº on page 66

vªInstalling on Sun Solarisº on page 75

vªInstalling on Windows 95 or Windows 98º on page 77

vªInstalling on Windows 3.1º on page 81

vªInstalling on Windows NTº on page 83

vªClasses for Javaº on page 89

vªConfiguring and Verifying a Clientº on page 90

Installing MQSeries Clients on the Same Machine as the Server

To install MQSeries client components on an MQSeries server machine, use the MQSeries Server CD-ROM (not the MQSeries Client CD-ROM). Choose the client install option to install client components from the MQSeries Server CD-ROM.

Use the MQSeries Client CD-ROM only to install MQSeries client components on a machine that is not an MQSeries server.

You may install client components from the MQSeries Client CD-ROM and later decide to install the MQSeries server on the same machine. Before you can do this, you must remove all the MQSeries client components from the machine. Then use the MQSeries Server CD-ROM to install the server and the client. You cannot install the server on a machine that already has client components installed from the MQSeries Client CD-ROM.

Remember that even when your server and client both reside on the same machine, you still need to define the MQI channels between them. See the MQSeries Clients book for details.

Installing on AIX

To install an MQSeries client on an AIX system, use the MQSeries Client CD-ROM supplied as part of the MQSeries product.

© Copyright IBM Corp. 2000 57