Installing on Windows 95 or 98

1.Use the NET USE command as follows:

NET USE devicename \\servername\netname

For example:

NET USE J: \\MQMNT\MQMSHARE

where:

vJ: is the logical drive name to be connected to the shared resource directory.

vMQMSHARE is the netname for M:\INSTMQS.

2.Go to the language directory that contains the SETUP.EXE and SETUP.ISS files and run SETUP -s.

Notes:

1.The -s parameter indicates that the installation is to be carried out in silent mode. This parameter is mandatory for an unattended installation.

2.SETUP.EXE uses the SETUP.ISS file in the current directory to silently install the product.

Removing an MQSeries Client from Windows 95 and Windows 98

If you want to remove the MQSeries client files from your machine, use Settings/ Control Panel/ Add-Remove Programs. First select MQSeries Client, which launches the uninstall program. Then select the components you want to remove and click Remove.

If you choose to remove all MQSeries components and are then likely to reinstall MQSeries, you should restart your computer to complete the uninstall process. You cannot reinstall any components until you have restarted.

All the MQSeries client files that were created at installation time are removed by the process.

Installing on Windows 3.1

To install an MQSeries client on a Windows 3.1 system you use the MQSeries Client CD-ROM supplied as part of the MQSeries product.

Installation

1.Insert the MQSeries Client CD-ROM into the CD-ROM drive.

2.Open the directory WIN31.

3.Change to the appropriate language subdirectory for the language you wish to install:

Chapter 7. Installing MQSeries Clients 81

Page 93
Image 93
IBM GC34-5557-00 manual Removing an MQSeries Client from Windows 95 and Windows, Installing on Windows